S K Fabricators is a finest MS compound fencing manufacturers in Chakan, Suppliers and fabrication services in Chakan. We produce and create high-quality MS (Mild Steel) Compound Fencing systems that offer high strength, security, and protection to industrial, commercial, and residential boundaries in the long term. To provide our fencing solutions, we design them out of high-quality mild steel and apply the advanced fabrication techniques to guarantee high performance even at extreme conditions of the environment.MS Compound Fencing is an effective barrier that is used to protect premises and still allows visibility and ventilation.We are also manufacturers MS safety fencing, fencing wire mesh, chain link fencing mesh and MS wire fencing.
What is MS Compound Fencing?
MS Partition Compound Fencing Suppliers in Chakan is one such fence design that is a high-quality mild steel and is used to offer security to the borders of residential, commercial, and industrial areas. It is a good and effective security mechanism to ensure that only the authorized parties can get access to it, safeguarding property, marking of property boundaries, as well as giving it a clean and professional look.
Types of MS Compound Fencing
We are MS Compound Fencing Manufacturers in Chakan and following are various types of MS Compound Fencing we offer.
- Chain Link Fencing- It is a popular and relatively economical product that is woven of MS (which is typically galvanized or PVC-coated to resist corrosion) wire and creates a diamond pattern mesh. It is widely used in general boundaries and security applications in the residential, agricultural and industrial environments.
- Welded Wire Mesh Fencing: This kind utilizes the wire of MS that is welded into a rigorous pattern of mesh, which may be galvanized or sprayed with powder. High-security fences, including anti-climb fences with extremely small mesh holes, are employed where the security required is high, as is the case with military bases or critical infrastructure.
- Barbed wire fencing: This is usually added to other fencing or is installed individually with MS angular posts, and the wires have sharp barbs between them to prevent intruders or animals.
- Concertina (Razor) Wire Fencing: This is made up of razor-cut coils (usually galvanized iron or MS) placed on top of walls or fences to form a powerful visual and physical barrier to high-security requirements.
- MS Grill Fencing: such fences have fabricated grills of mild steel, which are more commonly used as decoration in the vicinity of homes and gardens, as well as for security. They are customized in different designs and painted.
- MS Panel/Sheet Fencing: It entails the utilization of solid or profiled MS sheets to form boundary walls providing privacy and security.
- Solar Fencing Systems: This is a higher-tech model that utilizes the installation of a wire-based fence, normally of GI (Galvanized Iron) or MS, but with a non-lethal electric pulse sent along the wire, which is then powered by a solar charger to stop entry.
Technical Specifications of MS Compound Fencing
As MS Compound Fencing Suppliers in Chakan, we have added below a table of technical specifications for this Fencing.
| Component / Description |
Specification Details |
| Material Type |
Mild Steel (MS) conforming to IS 2062 / Fe 410 grade |
| Fence Type |
MS frame with GI chain-link or welded wire mesh |
| Fence Height |
1.8 m to 2.4 m above ground level (as per site requirement) |
| Vertical Posts |
MS Pipe / SHS – 49.5 mm × 49.5 mm × 4.5 mm (approx. 5.95 kg/m) or GI Pipe 48.3 mm OD × 4 mm thick |
| Post Spacing |
2.5 m to 3.0 m center-to-center |
| Intermediate Bracing |
MS Angle 25 mm × 25 mm × 3 mm or MS Flat 25 mm × 5 mm |
| Top / Bottom Rails (Optional) |
MS Square Tube 32 mm × 32 mm × 3.2 mm |
| Mesh / Chain-Link |
GI wire 10 SWG (~3 mm dia), mesh size 50 mm × 50 mm, zinc coating ≥ 40 microns |
| Fasteners / Fixing |
Galvanized binding wire, J-bolts, nuts, washers and clamps |
| Corner / End Posts |
Strengthened with stay braces at 45°, both sides |
Benefits of MS Compound Fencing
We are MS Compound Fencing Suppliers in Chakan and below are some of the key benefits of this Fencing.
- High Structural Strength: Mild steel is more mechanically strong and rigid, and the fencing can resist external forces, wind loads and other physical influences without any deformation.
- Durability and Longevity: The fencing system has a long service life because of the nature of mild steel. Being adequately woven and covered, it can last a few years in its use without much degradation.
- Corrosion Resistance: To prevent corrosion, MS fencing parts are normally coated with red oxide primer, enamel paint or hot-dip galvanizing. These anti-weather coats guarantee the stability of the performance in the damp and outdoor conditions.
- Economic Feasibility: MS compound fencing is more cost-effective than the RCC or masonry boundary walls both in material and labour cost and therefore it is an effective solution in large scale implementation.
- Facility of installation and maintenance: The MS fencing is a modular structure that enables it to be assembled and disassembled on site. Maintenance is also done only periodically such as painting or tightening of fasteners which make maintenance very low.
Applications of MS Compound Fencing
As MS Compound Fencing Fabrication Services Providers in Chakan, our Fencing are widely used in following key areas.
- Residential Properties: It gives Guarantees houses, villas, apartments and gated communities through the provision of a powerful boundary.
- Industrial Facilities: It prevents the unauthorized access and theft of factories, warehouses, and production units.
- Commercial Buildings: Fits offices, shopping malls and business parks to demarcate and secure premises.
- Educational Institutions: Boundary Fencing Provides security within schools, colleges and universities by limiting access to the school.
- Government Buildings and other public buildings: MS Partition Compound, Fencing Offers hospitals, civic facilities and public offices perimeter security.
Why choose us?
S K Fabricators is a trusted of high-quality MS Compound Fencing Fabrication Services in Chakan. Here’s why we stand out:
- Expert Fabrication: Decades of planning and production on the high-quality MS compound fencing with accuracy and stability.
- Premium Materials: The high-quality mild steel is employed in production to make it sturdy, durable and against wear and weather.
- Customizable Solutions: The fencing can be designed to suit your security and aesthetic requirements and can be installed at height, design, and pattern and finished to suit.
We are leading MS compound fencing manufacturers in Chakan, suppliers and fabrication services in Chakan .MS Compound Fencing is a low-cost, heavy-duty, and high-quality fence type that is used to keep the perimeter of residential, commercial and industrial premises secure. It is strong, low-maintenance, and glamorous and offers long-term security besides improving the physical looks of your premises. We are S K Fabricators that specialize in the design and manufacture of MS compound fencing of high quality in accordance to your needs. Connect with Us now!
